Wireless Thermostat Honeywell
Wireless Thermostat TP-82 can be used for rgler and to measure the temprature of a pice. The temprature of a pice can be adjusted on the rotation of a button configuration. The button can be locked to avoid accidental operation. The TP-82 thermostats possde an anti-freeze, and when combined with the alarm system Jablotron Oasis, provides the following functions:. wireless thermostat honeywell TP-82 is powered by battery, which can avoid the run of cable between the control panel, the wireless thermostat honeywell and the system of heating. The TP-82 wireless thermostat honeywell should be installed in idalie dry the indoor. The thermostat should be installed approximately 1. 50m from the ground in a place with good air circulation. Areas still air and illuminated by the sun are absolutely avoid. In addition, the TP-82 wireless thermostat honeywell should not be installed close to mtalliques structure or other objects that may block radio transmissions. You can enter the setup menu by pressing the button on the wireless thermostat honeywell for 10 seconds. Navigation through the setup menu is done with the rotation of the button. The menu will display the names of the paramtres tempratures (thi, TLO, ALHI, Allo). For some rgler Settings, just select the then support brive button. A temprature displayed, simply turn the knob to select the temprature DSIR then save it by pressing the button. This manipulation dernire return to the menu, which allows adjustment paramtres supplmentaires. The user can exit the menu select "OK" and pressing the button or automatically APRS 30 seconds. ATTENTION: GSI does not recommend the rgler paramtres too close to each other as this could Entran enabling / disabling the heating frquemment too. . . .
